View FTR-B3GB15Z_6646468.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

n features l dpdt 2c l ultra miniature low profle relay with high heat resistant material l height: 5.45mm, weight: 0.85g, mounting space: 87mm 2 l adopted superior contact spring for high frequency characteristic l comply with telcordia / fcc standard - isolation distance: min. 1.6mm - dielectric strength between coil and contact: 1500vac - surge strength: 2500v l low power: non-latch: 140mw (230mw at 24v) latch: 100mw (120mw at 24v) l high reliable bifurcated gold overlay silver contact l ul, csa recognized. confrms to iec 60950, ul1950, en60950. spacing & high breakdown voltage (basic insulation, 150 working volts, pollution degree 2). l rohs compliant since date code: 0431b8 please see page 11 and 12 for more information ftr-b3 series ul tra mini ature 2-poles 2a (low profile signa l rela y) r oh s compliant
2 ftr-b3 series remarks: actual marking on relay would not carry code ftr and be as below: ordering code: ftr-b3ga012z-b10 actual marking: b3ga012z note: *: - only surface mount types (g and s) are applicable - all relays are packaged in tubes unles p/n ends with -b10 ftr-b3 g b 012 z -b 10 [example] (a) (b) (c) (d) (e) (f ) (g) n ordering inform ation (a) series name ftr-b3 series (b) terminal type c: through hole g: surface mount s: surface mount, space saving (c) operation function a: standard type b: latching type (1 coil) (d) rated voltage of coil 1.5 : 1.5 vdc 009 : 9vdc 003 : 3vdc 012: 12 vdc 4.5 : 4.5vdc 024 : 24vdc 006: 6vdc (e) contact material z: gold overlay silver nickel (standard) p: gold overlay silver palladium (f) relay enclosing direction* b: standard enclosing direction (g) number of relays per reel* 10: 1,000 (standard) n p art numbers ordering part number series terminal type operation coil voltage contact material ftr-b3ca1.5z ftr-b3 c: through hole a: mono-stable (standard type) 1.5 z: au-ag-ni p: au-ag-pd ftr-b3ca003z 3 ftr-b3ca4.5z 4.5 ftr-b3ca006z 6 ftr-b3ca009z 9 ftr-b3ca012z 2 ftr-b3ca024z 24 ftr-b3ga1.5z g: surface mount 1.5 ftr-b3ga003z 3 ftr-b3ga4.5z 4.5 ftr-b3ga006z 6 ftr-b3ga009z 9 ftr-b3ga012z 2 ftr-b3ga024z 24 ftr-b3sa1.5z s: space sav - ing surface mount 1.5 ftr-b3sa003z 3 ftr-b3sa4.5z 4.5 ftr-b3sa006z 6 ftr-b3sa009z 9 ftr-b3sa012z 2 ftr-b3sa024z 24 standard type
3 ftr-b3 series latching type (1 coil) ordering part number series terminal type operation coil voltage contact material ftr-b3cb1.5z ftr-b3 c: through hole b: latching 1.5 z: au-ag-ni p: au-ag-pd ftr-b3cb003z 3 ftr-b3cb4.5z 4.5 ftr-b3cb006z 6 ftr-b3cb009z 9 ftr-b3cb012z 2 ftr-b3cb024z 24 ftr-b3gb1.5z g: surface mount 1.5 ftr-b3gb003z 3 ftr-b3gb4.5z 4.5 ftr-b3gb006z 6 ftr-b3gb009z 9 ftr-b3gb012z 2 ftr-b3gb024z 24 ftr-b3sb1.5z s: space sav - ing surface mount 1.5 ftr-b3sb003z 3 ftr-b3sb4.5z 4.5 ftr-b3sb006z 6 ftr-b3sb009z 9 ftr-b3sb012z 2 ftr-b3sb024z 24
4 ftr-b3 series n coil d ata chart coil voltage nominal voltage (vdc) max. coil voltage* coil resistance ( 10%) must operate voltage* 2 must release voltage* 2 nominal power (mw) 1.5 1.5 3.53 vdc 16.1 ? 1.13 vdc 0.15 vdc 140 003 3 7.05 vdc 64.3 ? 2.25 vdc 0.3 vdc 4.5 4.5 10.58 vdc 145 ? 3.38 vdc 0.45 vdc 006 6 14.10 vdc 257 ? 4.5 vdc 0.6 vdc 009 9 21.15 vdc 579 ? 6.75 vdc 0.9 vdc 012 2 28.20 vdc 1,028 ? 9.0 vdc 1.2 vdc 024 24 56.40 vdc 2,504 ? 18.0 vdc 2.4 vdc 230 standard type latching type (1 coil) note: all values in the table are measured at 20?c. *1: no contact current at 20c. please see 'operating range' data for other conditions. *2: specifed values are subject to pulse wave voltage. coil voltage nominal voltage (vdc) max. coil voltage* coil resistance ( 10%) must operate voltage* 2 must release voltage* 2 nominal power (mw) 1.5 1.5 3.53 vdc 22.5 ? 1.13 vdc -0.13 vdc 100 003 3 7.05 vdc 90 ? 2.25 vdc -2.25 vdc 4.5 4.5 10.58 vdc 203 ? 3.38 vdc -3.38 vdc 006 6 14.10 vdc 360 ? 4.5 vdc -4.5 vdc 009 9 21.15 vdc 810 ? 6.75 vdc -6.75 vdc 012 2 28.20 vdc 1,440 ? 9.0 vdc -9.0 vdc 024 24 56.40 vdc 4,800 ? 18.0 vdc -18.0 vdc 120
5 ftr-b3 series n specific ations 1 8 m e t i pe y t g n i h c t a l a ) ( 3 b - r t f b ) ( 3 b - r t f t c a t n o c t n e m e g n a r r a c m r o f 2 l a i r e t a m t c a t n o c nickel / gold overlay silver palladium r e v l i s y a l r e v o d l o g e p y t t c a t n o c ) r a b - s s o r c ( s t c a t n o c d e t a c r u f i b e c n a t s i s e r t c a t n o c ) e u l a v l a i t i n i ( m 5 7 ? m u m i x a m , (6vdc, 1a) g n i t a r t c a t n o c ) e v i t s i s e r ( a 3 . 0 c a v 5 2 1 1a / c d v 0 3 t n e r r u c g n i h c t i w s / g n i y r r a c m u m i x a m a 2 r e w o p g n i h c t i w s m u m i x a m w 0 3 / a v 5 . 2 6 e g a t l o v g n i h c t i w s m u m i x a m c d v 0 2 2 , c a v 0 5 2 1 * d a o l g n i h c t i w s m u m i n i m * a m 1 0 . 0 , c d v m 0 1 1 l i o c ) c ? 0 2 t a ( r e w o p l a n i m o n mw to 230mw 0 4 mw to 120mw 0 0 1 ) c ? 0 2 t a ( r e w o p e t a r e p o mw to 130mw 0 mw to 68mw 7 5 ) t s o r f o n ( e r u t a r e p m e t g n i t a r e p o c ? 5 8 + o t c ? 0 4 - e m i t e u l a v e t a r e p o ) e c n u o b t u o h t i w , e g a t l o v l a n i m o n t a ( m u m i x a m s m 3 e s a e l e r ) e c n u o b t u o h t i w , e g a t l o v l a n i m o n t a ( m u m i x a m s m 3 e f i l l a c i n a h c e m 0 1 x 0 5 6 10 x 0 2 6 ) d a o l e v i t s i s e r ( l a c i r t c e l e 0 1 x 0 0 1 3 ) z h 5 . 0 t a ( c d v 0 3 a 1 t a . n i m s n o i t a r e p o 0 1 x 0 0 1 3 ) z h 5 . 0 t a ( c d v 5 2 1 a 3 . 0 t a . n i m s n o i t a r e p o r e h t o n o i t a r b i v e c n a t s i s e r n o i t c n u f l a m m m 3 . 3 f o e d u t i l p m a e l b u o d t a z h 5 5 o t 0 1 e c n a r u d n e m m 5 f o e d u t i l p m a e l b u o d t a z h 5 5 o t 0 1 k c o h s e c n a t s i s e r n o i t c n u f l a m s / m 0 5 7 . n i m 2 e c n a r u d n e s / m 0 0 0 1 . n i m 2 t h g i e w g 8 . 0 y l e t a m i x o r p p a ops. min. (at 3hz) ops. min. (at 3hz) standard type * minimum switching loads mentioned above are reference values. please perform the confrmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
6 ftr-b3 series type compliance contact rating ul ul 508 e63615 flammability: ul 94-v0 (plastics) 0.5a, 125vac (resistive) 1a, 30vdc (resistive) 0.3a, 110vdc (resistive) 2a, 30vdc (resistive) csa c22.2 no. 14 lr 40304-58 n safet y standards item ftr-b3 resistance (initial) (500 vdc) minimum 1,000 m? 1 min. dielectric strength open contacts 1,000 vac (50/60 hz) 1 min. coil and contacts 1,500 vac (50/60 hz) 1 min. adjacent contacts 1,000 vac (50/60 hz) 1 min. surge voltage (coil and contact) 2,500 v 2 x 10s standard wave clearance adjacent contacts 1.0mm open contacts 0.28mm coil and contacts 1.0mm creepage adjacent contacts 1.0mm open contacts 0.28mm coil and contacts 1.60mm n insul ation n characteristic d ata 5 4 3 2 1 0 0.1 0.2 0.3 operation (return time characteristics) time (ms) release operation time coil power (w) b3ga4.5z n=10 80 60 40 20 0 0 0.1 0.2 0.3 coil temperature rise coil temperature rise (c) coil power (w) contact carrying current: 1a contact carrying current: 0 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0 20 40 60 80 100 ambient temperature (maximum applied voltage, operating voltage characteristics) nominal voltage multiplying factor (%) ambient temperature (c) standard type contact carrying current: 0 contact carrying current: 1a operating voltage (hot coil) operating voltage (cool coil) 2 1 0.5 0.3 0.2 0.1 1 2 5 10 20 30 50 100 200 maximum switching power contact current (a) contact voltage (v) ac resistive dc resistive 100 70 50 40 30 20 10 0 0.2 0.4 0.6 0.8 1.0 1.2 life curve operation (x10 4 ) contact current (a) 30 vdc resistive 125 vdc resistive standard type
7 ftr-b3 series latching type (1 coil) ftr-b3gb4.5z n=10 2 3 4 0.1 0.2 0 5 0.3 0 operation (return time characteristics) t ime (ms) release operation time coil power (w) 90 80 70 60 50 ftr-b3gb4.5z n=10 100 50 5 1 0 0.5 200 100 40 distribution (%) t ime (ms) set/reset pulse characteristics 0 20 40 60 80 0.1 0.2 0.3 0 coil t emperature rise coil t emperature rise (c) coil power (w) contact carrying current: 1a contact carrying current: 0 0 2 0 4 0 6 0 8 0 100 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 ambient t emperature (maximum applied voltage, operating voltage characteristics) nominal v oltage multiplying factor (%) ambient t emperature (c) contact carrying current: 0 contact carrying current: 1a operating voltage (hot coil) operating voltage (cool coil) latch 2 0.5 0.4 0.3 0.2 0.1 200 100 50 10 5 3 0 maximum switching power contact current (a) contact v oltage (v ) ac resistive dc resistive 0 0.2 0.4 0.6 0.8 1.0 1.2 100 0 10 20 30 40 50 life curve operation (x10 4 ) contact current (a) 30 vdc resistive 125 vdc resistive n reference d ata 100 80 60 40 20 0 10 20 30 40 50 60 70 80 distribution of operate and release voltage distribution (%) nominal voltage multiplying factor (%) ftr-b3ga4.5z n=100 operate release 100 80 60 40 20 0 1 2 3 4 5 distribution of operate and release time distribution (%) time (ms) ftr-b3ga4.5z n=100 operate release 100 80 60 40 20 0 1 2 3 4 5 distribution of bounce time distribution (%) ftr-b3ga4.5z n=100 operate release time (ms) standard type
8 ftr-b3 series 150 100 50 0 1 3 5 7 10 30 50 70 100 300 500 700 1000 high frequency characteristics frequency (mhz) ftr-b3ga4.5z n=2 ftr-b3gb4.5z n=2 isolation (db) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1 10 30 50 70 3 5 7 1000 100 300 500 700 high frequency characteristics frequency (mhz) insertion loss (db) ftr-b3ga4.5z n=2 ftr-b3gb4.5z n=2 100 80 60 40 20 0 20 40 60 80 100 distribution of contact resistance distribution (%) ftr-b3ga4.5z n=100 make break contact resistance (m ? ) 20 10 0 -10 -20 20 10 0 -10 -20 0 2 4 6 8 10 magnetic interference distance between relays i (mm) operating voltage release voltage when coil is on when coil is off nominal voltage multiplying factor (%) ftr-b3ga4.5z n=4 nominal voltage multiplying factor (%) standard type 20 10 0 -10 -20 20 10 0 -10 -20 0 2 4 6 8 10 magnetic interference distance between relays i (mm) operating voltage release voltage when coil is on when coil is off nominal voltage multiplying factor (%) ftr-b3ga4.5z n=4 nominal voltage multiplying factor (%) standard type latching type (1 coil) 0 8 0 70 60 50 40 30 20 10 100 90 80 70 60 50 40 30 20 10 0 n=100 ftr-b3gb4.5z distribution of operate and release v oltage distribution (%) nominal v oltage multiplying factor (%) operate release 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 100 ftr-b3gb4.5z n=100 0 10 20 30 40 50 60 70 80 90 100 distribution of contact resistance distribution (% ) make brea k contact resistance (m ? ) 0 150 1000 0 100 50 100 ftr-b3gb4.5z n=2 high frequency characteristics frequency (mhz) isolation (db) 0 1.8 1000 0 100 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 ftr-b3gb4.5z n=2 high frequency characteristics frequency (mhz) insertion loss (db)
9 ftr-b3 series 8 7 6 5 1 2 3 4 (-) (+) marking (coil side indication) 5.080.2 3.5 +0.3 -0.2 0.5 0.05 0.4 +0.2 3.2 0.2 2.2 0.2 2.2 0.2 (1.5) 3.2 2.2 2.2 5.0 8 8-o 0.85 5.2 0.02 10.6 0.2 7.2 0.2 n dimensions l dimensions unit: mm l mounting pad (top view) l wiring diagram (top view) ftr-b3c( )( )( ) - through hole type 1 2 3 4 8 7 6 5 (+) (-) marking (coil side indication) 5.080.2 8.2 +0.5 -0.3 1.05 0.4 +0.2 3.2 0.2 2.2 0.2 2.2 0.2 (1.5) 3.2 2.2 2.2 5.45 +0 0.2 +0.2 2.56 2.56 6.64 0.8 0.8 0.8 0.8 10.6 0.2 7.2 0.2 l dimensions unit: mm l mounting pad (top view) l wiring diagram (top view) ftr-b3g( )( )( ) - surface mount type (standard)
10 ftr-b3 series 1 2 3 4 8 7 6 5 (+) (-) marking (coil side indication) 5.080.2 7.2 +0.5 -0.3 1.05 0.4 +0.2 3.2 0.2 2.2 0.2 2.2 0.2 (1.5) 3.2 2.2 2.2 5.45 +0 0.2 +0.2 2.08 2.08 6.14 0.8 0.8 0.8 0.8 10.6 0.2 7.2 0.2 n dimensions l dimensions unit: mm l mounting pad (top view) l wiring diagram (top view) ftr-b3s( )( )( ) - space saving type n p ackaging specific ations l packaging method - packaging standard: jis c 0806 - taping type: tb 1612 - reel type: r16d - quantity of 1reel: 1000 pieces l packaging orientation code:b orientation mark side feeding l (2) dimensions - reel dimensions top cover tape embossed carrier tape l tape dimensions note: relays are sold in packs of 1000 pieces, please order 1000 pieces as one unit. unit: mm
ftr-b3 series n recommended soldering conditions for smt (temp erature profile) irs (infrared reflow soldering) t 3 t 2 t t 3 = 250c max. t 2 = 220c max. t = 130c max. 0 t emperature (c) soldering preheating cooling 120 sec maximum 30 sec max. vps (v apor phase soldering) t 3 t 2 t t 3 = 200c maximum t 2 = 165c maximum t = 100c maximum 0 t emperature (c) soldering preheating cooling 90 sec max. 60 sec max. 60 sec max. 215c maximum note: 1.temperature profles show the temperature of pc board surface. 2.please perform soldering test with your actual pc board before mass production, since the temperatures of pc board surfaces vary according to the size of pc board, status of parts mounting and heating method. n precautions - for details on general precautions, refer to the section on technical descriptions. - since this is a polarized relay, follow the instructions of the internal wiring diagram for the connections of the coil. - note that the terminal layout and internal wiring of the surface mount relay are a top view - smt versions of the ftr-b3 relays have moisture sensitivity level 3, acc. jedec-j-std-020d - smt versions of the ftr-b3 relays will be shipped in "dry pack". relays have an "out of bag" storage time of 192h.
2 ftr-b3 series rohs compliance and lead free relay information refow solder condition 3. moisture sensitivity l moisture sensitivity level is not applicable to electromechanical relays. 4. t in whisker l snagcu and sncuni solder are known as low risk of tin whisker. no considerable whisker length was found by our in-house test. we highly recommend that you confrm your actual solder conditions flow solder condition: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c solder bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec. 1. general information l if applicable, relays produced after the specifc date code that is indicated on each data sheet are lead-free now. all of our signal and power relays are lead-free. please refer to lead-free status info. (http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf) l lead free solder plating currently used in relays is sn-3.0ag-0.5cu. from february 2005 forward sn-3.0cu-ni will be used for the ftr-b3 and ftr-b4 series relays. l all signal and power relays also comply with rohs. please refer to individual data sheets. relays that are rohs compliant do not contain the 5 hazardous materials that are restricted by rohs directive (lead, mercury, chromium iv, pbb, pbde, decabde and pfos). l it has been verifed that using lead-free relays in leaded assembly process will not cause any problems (compatible). l lf is marked on each outer and inner carton. (no marking on individual relays). l to avoid lead containing relays (for lead-free sample, etc.) please consult with area sales offce. l we will ship lead containing relays as long as the lead containing relay inventory exists, if allowed. note: cadmium was exempted from rohs on october 21, 2005. (amendment to directive 2002/95/ec) 2. recommended lead free solder profle l recommended solder paste sn-3.0ag-0.5cu or sn-3.0 cu-ni (only ftr-b3 and ftr-b4 from february 2005. max. 120 sec. 9 0~120 sec. 2 0~30 sec. (duration ) coolin g p re-heatin g s oldering peak t emp.: max. 250c 250 220 130 170 temperature (c )
13 ftr-b3 series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/relays/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2009 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. march 5, 2009.

▲Up To Search▲

Price & Availability of FTR-B3GB15Z

	To Download FTR-B3GB15Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .